BMS2300

$750.00

All-in-One — Low Voltage

Monitors and balances 3 to 16 series cells, 10 V to 60 V
300 A continuous solid-state switching with secondary disconnect
Redundant cell voltage and temperature measurement
Parallel packs with automatic addressing
CAN or RS-485, plus fan, heater and expansion I/O

Product Page 🡆

All-in-One — Low Voltage

Monitors and balances 3 to 16 series cells, 10 V to 60 V
300 A continuous solid-state switching with secondary disconnect
Redundant cell voltage and temperature measurement
Parallel packs with automatic addressing
CAN or RS-485, plus fan, heater and expansion I/O

Summary

The BMS2300 is our integrated BMS for low voltage packs from 10 V to 60 V. One board measures up to 16 cells in series, senses pack current and switches up to 300 A continuously, so there are no separate cell monitors, contactors or fuses to buy and integrate, saving cost and complexity in your pack.

It runs on the same processor and safety software as the BMS2000, is designed with functional safety in mind, and communicates over CAN or RS-485. Need more capacity? Connect packs in parallel and they address themselves automatically. Built for energy storage, backup power, light electric vehicles, drones and industrial packs.

DOWNLOADS: BMS Product Family Brochure (PDF)

AVAILABLE CONFIGURATIONS

BMS2300-1660K300FSX-000: Full-featured, 16 cells, 26 V - 60 V, functional-safety capable
MS2300-1660F300BNC-100: Reduced feature set, 16 cells, 26 V - 60 V, CAN only
BMS2300-0000K300FSX-000: Evaluation, cell count and operating voltage set by Cell Key Board

FEATURES

CAN or RS-485 Communication, Switch Selectable
Up to 11 NTC Inputs
Fan & Heater Control Outputs
Interlock Loop & E-Stop Supervision
Water Ingress Sensor Input
On-Board Gas, Pressure, Humidity & Shock Sensors
MicroSD Card & 2-Mbit FRAM Data Logging
Expansion Header for Wireless & Add-On Features
Lock-Step Arm Cortex-M7 with SafeRTOS

Supports 3 to 16 Series Cells
10 V - 60 V Operating Range, Set by Cell Key Board
00 A Continuous, 500 A Peak (5 s)
Solid-State Charge & Discharge Switching
Secondary Disconnect Device
On-Board Battery & Cell Sense Fusing
Redundant Cell Voltage & Temperature Measurement
Integrated Coulomb Counter
Fast Over-Current Detection
Parallel Pack Support with Auto-Addressing

I/O

  
    I/O
    BMS2000
    Configurable
  
    Contactor Outputs, Redundant High & Low Side
    6
    Hold & peak current, PWM frequency
  
    Contactor Auxiliary Inputs
    6
    Wetting current
  
    Pyroswitch Output
    1
    Deployment current & time
  
    PWM Loop Outputs & Inputs
    6 + 6
    HVIL, E-stop or general purpose I/O
  
    Active-High Digital Inputs
    6
    Wake source
  
    Active-Low Digital Inputs
    6
    	Wetting current
  
    Analog Current Inputs, 4 - 20 mA
    6
     
    NTC Temperature Inputs
    8
     
    Water Sensor Input
    1
    Detection threshold
  
    24 V Auxiliary Outputs, 1 A
    8
     
    12 V & 5 V Auxiliary Outputs, 2 A
    2
     
    Total
    68

Specifications

  
    Parameter
    Conditions
    Min
    Typical
    Max
    Units
  
    Battery Operating Voltage
    Set by Cell Key Board
    10	
     
    60
    V
  
    Series Cells
    
    	3	
    
    16	
     
    Continuous Current
    25 °C
     
    300
    A
  
    Peak Current
    5 s, 25 °C
     
    	500
    A
  
    Output Capacitance at Turn-On
    
    10
    mF
  
    Balancing Current
    VCELL = 4.2 V
     
    230
     
    mA
  
    NTC Inputs
    
    	11	
     
    Operating Temperature
     
    	-40	
     
    85
    °C
  
    Dimensions
     
    	165.1 x 254.0 x 32.1	
     
    mm